#### 2026-10-28 *1.75* - **Hidden characters can be shown.** The editor's right-click menu has a *Display* submenu with *Hidden Characters*, *Line Numbers* and *Word Wrap*; *View > Hidden Characters* is the same switch. With it on, every space is marked with a dot, a tab with an arrow across its width, a no-break space with a small ring, a zero-width character (zero-width space and joiners, word joiner, soft hyphen, byte order mark) with a tick, and the end of every line with a pilcrow (¶) - so trailing spaces, tabs mixed with spaces and invisible characters pasted from the web can be seen. Resting the pointer on a mark names the character in a tooltip with its code, decimal value and UTF-8 bytes (*NO-BREAK SPACE, U+00A0, 160, C2 A0*); on a pilcrow it gives the file's line ending (LF, CRLF or CR). The text itself is unchanged. Applies to text tabs (word-processing tabs keep their own view) and is remembered with the other View settings. Framework: `UltraCanvasTextArea::SetShowHiddenCharacters`. - **Markdown footnote and abbreviation tooltips open next to the pointer** instead of over the toolbar near the top of the window. Framework: `UltraCanvasTextArea::HandleMarkdownHover`. #### 2026-10-25 *1.74* - **Starting UltraTexter after closing it could say "UltraTexter is already running"** on Windows, with the old copy left in Task Manager without a window. The framework fixes behind it: the message bus's clean-up no longer waits inside Windows' process shutdown, and an exit watchdog ends a copy still running ten seconds after its window closed, leaving `UltraTexter-exit-*.txt` in `%LOCALAPPDATA%\UltraCanvas\CrashDumps` that names where it was stuck. A start made meanwhile waits for it and opens. #### 2026-10-24 *1.73* - **Typing no longer makes the spelling marks below the caret flicker.** Each letter typed in a line shifted every later word by a byte, and every red squiggle from the caret down disappeared until the background check came back, then reappeared: at every keystroke the rest of the document blinked. The marks now move with the text and stay where they are; only the word being typed loses its mark until it is checked again. The same holds in word-processing tabs (`.odt`, `.docx`, `.doc`). - **The spelling language is detected automatically.** When more than 70% of the words in the document being edited are flagged, it is almost certainly written in another language than the dictionary in use. Texter then checks the text against the other installed dictionaries and switches to the one that flags the fewest words, provided it flags fewer than 15% - type a German text with English selected and the dictionary changes to German by itself. The choice is stored like one made from *Edit > Spelling > Dictionary*. Only the active tab switches the language, so two documents in two languages do not keep switching it back and forth; changing tab lets the dictionary follow the document on screen. On by default; *Edit > Spelling > Detect Language Automatically* turns it off. #### 2026-10-22 *1.72* - **Edit > Translate Selection...** translates the selected text through UltraAI and puts the translation in its place. A model on this computer is used first - the local runtime's, which UltraAI's Local models page manages - and a cloud service only when one was set up as the default translator. The first time nothing is installed, the "Get a local model" dialog offers the download (the recommended model preselected, with its size and licence) and the translation runs once it is done. The target language is asked for as a code (en, de, fr, pt-BR) and remembered for the session. Only in a build with the UltraAI module; without it the menu entry says so. #### 2026-10-22 *1.71* - **A file that cannot be saved says so, and why.** When writing a file failed - the save icon, Ctrl+S, Save As, or *Yes* to "Save all before closing?" - nothing happened: the tab stayed unsaved, closing the window just stopped, and no message appeared. Texter now shows a *Save Failed* message with the file's full path, the step that failed (opening the file or writing it), the cause the framework finds (the folder does not exist, the file is marked read-only, access is denied because another program holds the file or you lack permission, the disk is full) and the system's error code and text (for example *13: Permission denied*). It then opens the Save dialog in the file's folder, and again after each failed attempt. When closing, cancelling that dialog keeps the window open with the edits; a file saved elsewhere lets the close go on. #### 2026-10-22 *1.70* - **Files with Thai, CJK or other non-Western names now open on Windows.** When Explorer's *Open with*, the MSIX package's file types or a second start hands Texter a file, the name arrives as `main()`'s narrow argument, which Windows encodes in the ANSI code page. A name that code page could not hold arrived as `?` and did not open. Texter's executable now embeds the framework's manifest with the UTF-8 code page, as UltraViewer's does (`ultracanvas_embed_windows_manifest(Texter)`), so the name arrives intact on Windows 10 1903 and later. The MSIX package requires 1903 or later for this reason. #### 2026-10-20 *1.69* - **Pasted text picks its own language.** Paste into a new, empty tab and UltraTexter recognises what the text is - C++, C, Python, Markdown, JSON, HTML, XML, SQL, Shell, JavaScript, TypeScript, Java, C#, Go, Rust, YAML, CSS and more - and switches the tab's highlighting (Markdown opens in the Markdown editor) and the status-bar language to match, as opening a file does. A `#!` line names its interpreter; otherwise the lines that can only be one language decide, and code shown inside a Markdown ``` fence counts for Markdown. When the text does not say clearly (prose, a word or two) the tab stays plain text. Only a tab that has never held text is guessed for, and a language picked from the status bar is never overridden. Works for Ctrl+V, Shift+Insert, *Edit > Paste*, the toolbar and the right-click menu. Framework: `DetectLanguageFromContent` in `UltraCanvasLanguageDetect.h` (framework changelog: `detect-language-from-content`). #### 2026-10-18 *1.68* - **Search shows every match.** While the search bar is open, all matches in the visible part of the document are highlighted, not only the one that is selected; the selected match keeps the selection colour so it still stands out. Matches above or below the view show as ticks on the scrollbar, so you can see where the rest are. The highlights move with the text as you edit (in files over 256 KB, once you pause typing). The hex view marks matches in the same colour. Framework: `HighlightMatches` in `UltraCanvasTextArea` (framework changelog: `textarea-search-highlights`). #### 2026-10-14 *1.67* - **One UltraTexter at a time.** Opening a file while UltraTexter is already running opens it in the running copy - in a new tab of the window used last, as *File > Open* does, or by switching to the tab of any window that has it open already - and brings that window forward (restored if minimised) instead of starting a second one; starting it without a file brings the open window forward. Every file named on the command line opens now, not only the last one. `--dark` and `--lang` keep choosing how a first start sets itself up; a later start's are not handed over. Two starts at the same moment cannot both stay, and a copy that does not answer is reported with *"UltraTexter is already running"*. Framework: `UltraCanvasSingleInstance` (framework changelog: `instance-lock`). #### 2026-10-14 *1.66* - **Sharp icons in the markdown side bar.** Italic, Unordered List, Ordered List and Code Block were exports with fractional coordinates and hairline strokes: at the 24 px the side bar draws them, the list bars fell between two pixel rows and came out as grey double lines, and the italic *i*, the numbers and the `{#}` were smeared. They are redrawn on the 24 px grid in the weight of the bar's other icons - black, 1 px lines on whole pixels: single-row bars, rings for the bullets, 1 2 3 in a 5 x 7 pixel face, upright braces and hash, and a slanted *i* whose top and foot sit on whole rows. The DemoApp's WYSIWYG page uses the same icons (framework changelog: `demo-vector-toolbar-icons`). #### 2026-10-14 *1.65* - **Word documents go through FileLoader, and the dialogs offer its types.** - Texter read and wrote `.odt`, `.docx` and `.doc` by calling the Word document reader and writer itself. It now reads them with `UltraCanvasFileLoader::LoadTextDocument` and saves them with `SaveTextDocument`. A damaged package still opens in the plain view, and a legacy `.doc` it cannot read still says so. - The Open dialog's "Word Processing" place now holds FileLoader's "Documents": every type `LoadTextDocument` reads. - The Save dialogs offer ODT and DOCX, one type each. They used to offer `.doc` too, which Texter then refused to write. - Insert Image offers every picture type the build reads, and SVG, instead of five types (framework changelog: `fileloader-type-lists`). #### 2026-10-13 *1.64* - **The settings and the autosave folder are found in a profile named in any script.** The config folder (`config.ini`, the recent files, the session) and the autosave folder were built by hand from `HOME`, `XDG_CONFIG_HOME` and `XDG_DATA_HOME` read through the narrow `getenv`, which on Windows answers in the ANSI code page. Both come from the framework's rules now - the settings root (`UltraCanvasSettingsFolderRoot`) and the data folder (`UltraCanvasDataFolder`), every variable read as UTF-8 - and land in the same folders as before on every platform (framework changelog: `settings-root-and-xdg-everywhere`). #### 2026-10-11 *1.63* - **Menus opened from buttons stay clear of them.** The Recent files menu of the toolbar and the search bar's settings and history menus open with the framework's `OpenMenuAnchored` (framework changelog: `menu-anchors-symbolic-icons`): below their button, or above it when there is no room below - a search bar at the foot of the window no longer opens its menus over itself. The menus' line icons (zoom, theme and the rest) are painted in the entry's text colour, so they are light in the dark theme instead of black on dark grey. #### 2026-10-11 *1.62* - **`--help` and `--version` print again.** Both wrote to the framework's debug log, which a Release build keeps off, so `UltraTexter --help` printed nothing at all - on Linux and macOS as much as on Windows. They now write to stdout, and an unknown argument is reported on stderr. On Windows the text reaches the prompt as well: the framework attaches a GUI program to the prompt's console before `main()` now (framework changelog, pending entry `windows-gui-apps-print-help`). - **The standalone build (`Apps/Texter/CMakeLists.txt`) opens no console window on Windows either.** Its `UltraTexter.exe` was a console program in every build; a Release build is now a GUI program, like the editor the root build makes. #### 2026-10-10 *1.61* - **Menus in the dark theme keep their separators and outline.** The framework's menus took on the current desktop look (framework changelog: `modern-menus`), whose hairlines are translucent black - invisible on the dark theme's menubar and its drop-downs, which only had their background, text and hover recoloured. The theme switch now also takes the outline, separator, shortcut, disabled-entry and shadow colours from the matching `MenuStyle` (`Dark()` or `Default()`). #### 2026-10-05 *1.60* - **Settings, autosave and comments work in a Windows profile named in any script.** The configuration folder (`config.ini`, the recent files, the session) and the autosave folder were found through the narrow `getenv("APPDATA")`, which answers in the ANSI code page: for a user name outside it - Thai or Cyrillic under code page 1252 - the folder came back with `?` in it and nothing was saved or restored. A comment's author, taken from `USERNAME`, was stored in those code-page bytes too. All three are read with the framework's `GetEnvUtf8` now (framework changelog: `env-narrow`). #### 2026-10-05 *1.59* - **Published by ULTRA OS Development GmbH.** The Windows file properties of `UltraTexter.exe` (Company and Copyright) and its application manifest (`Apps/Texter/UltraTexter.{rc,manifest}`) now name the company's new name instead of Cloverleaf UG. See `Docs/UltraCanvas/changelog.d/company-name-ultra-os-development.md`. #### 2026-10-01 *1.58* - **Typing in the search bar no longer hangs on a large file.** With a big document open (the ~940 KB framework changelog, say), each keystroke in the search bar made the editor find the matches to highlight one at a time, each search starting again from the top of the file - and the app froze. All matches are now found in a single pass. **Replace All** had the same problem on a large file and is fixed the same way. See `Docs/UltraCanvas/changelog.d/search-highlight-quadratic.md`. - **Search as you type starts at two characters.** A single letter matches most of a document, so the search bar now waits for a second one before it searches and highlights; deleting back below two clears the highlights and the count. Enter, Find Next and Find Previous still search for a single character. #### 2026-10-01 *1.57* - **A word-processing tab prints on Windows, and on printers that do not read PDF.** Print sent the document only as a PDF, which a Windows printer, a GutenPrint printer and an IPP printer without PDF cannot take - they refused the job with "Print Failed". The same pages now go along, and those printers draw them: fonts, pictures, tables, headers and page numbers, with the printer, copies, paper and page range chosen in the dialog. A framework change, see `Docs/UltraCanvas/changelog.d/print-pages-beside-pdf.md`. #### 2026-10-01 *1.56* - **Texter builds without MuPDF again.** Opening and saving PDFs needs the PDF view, which the framework compiles only when MuPDF is found; Texter called it regardless, so a build on a machine without MuPDF failed to link (`UltraCanvasPDFView::LoadFromPath` / `SaveAs` undefined). Such a build now links, and opening a PDF in it says that this build has no PDF support. #### 2026-09-30 *1.55* - **Printing a word-processing tab (.docx, .odt, .doc) printed a blank page.** File > Print read the tab's text area, which a word-processing tab keeps detached and empty. It now prints the document as it looks - its pages as a PDF, with fonts, pictures, tables, headers and page numbers - and **File > Export as PDF...** saves that PDF. - **The Checklist button works in a word-processing tab.** It used to be greyed out there, because the document model had no check list; it now turns the paragraphs into check list items, whose boxes tick on a click. See `Docs/UltraCanvas/changelog.d/rich-text-edit-gaps.md`. - **Word-processing tabs: pictures, tables and typing.** A picture can be clicked and resized by its handles, and its right-click menu has *Picture Alt Text...* and *Picture Original Size*. Dragging across table cells selects them, and *Table > Merge Selected Cells* merges them. Selected text can be dragged to move it (Ctrl to copy), and picture files dropped on the document are inserted there. Typing gets curly quotes, dashes and lists from `1. ` / `- ` as in a word processor. - **Word-processing documents open on their pages** - headers, footers, page numbers, paragraphs and tables continuing over page breaks with their header rows repeated. *View > Page Layout (documents)* switches back to one column (remembered). Double-click a header or footer (or the page's top or bottom margin) to edit it; Escape returns to the body. - **Styles in word-processing tabs.** The right-click menu has *Paragraph Style* and *Character Style* submenus with the document's styles, *New Style from Paragraph...* and *Update Style to Match Paragraph*; changing a style changes every paragraph that has it. - **Footnotes and endnotes in word-processing tabs.** The right-click menu has *Insert Footnote* and *Insert Endnote*; the note opens for typing, and a double-click on a note or its number opens it again. Footnotes sit at the foot of their page, and notes in .docx and .odt files now open as notes (ODT ones used to appear in brackets in the text) and save back as notes. - **Contents, captions and cross-references in word-processing tabs.** The right-click menu's *References* submenu inserts and updates a table of contents (its page numbers follow the pages), inserts a numbered Figure or Table caption, adds a bookmark, and inserts a cross-reference to a caption or bookmark - its text or its page. Ctrl+click on a contents entry goes to the heading. - **Comments in word-processing tabs.** *New Comment...* in the right-click menu comments on the selection; comments show in a pane beside the text, signed with your login name, and can be edited (double-click), resolved or deleted. Comments in .docx and .odt files now show and are saved back. - **Track changes in word-processing tabs.** The right-click menu's *Track Changes* submenu turns tracking on, steps through the changes and accepts or rejects them one at a time or all at once. Insertions show underlined, deletions struck through, as in Word and Writer, and changes tracked in a .docx or .odt file now show instead of being quietly accepted. - **Columns in word-processing tabs.** *Columns and Sections* in the right-click menu sets the text in one, two or three columns and inserts section breaks; newsletters and papers set in columns in .docx and .odt files now show their columns in page layout. - **Formatted copy and paste with other programs.** Text copied from a word-processing tab pastes into a word processor, browser or mail with its formatting, tables and pictures, and text copied from a web page, Word or Writer pastes into a word-processing tab formatted instead of as plain text. - **Input methods and right-to-left text in word-processing tabs.** Text being composed with an input method (Japanese, Chinese, Korean) shows in the document, underlined, until it is committed. Arabic and Hebrew paragraphs start at the right, the arrow keys move the way they point through them, and *Paragraph Right-to-Left* in the right-click menu sets a paragraph's direction; .docx and .odt files keep it. - Ctrl+click on a link to a place inside the document (a "#bookmark" link) now goes there instead of trying to open it in a browser. - **The zoom box zooms a word-processing tab** (and a page wider than the window scrolls sideways). It used to change the font size of plain-text tabs only. #### 2026-09-29 *1.54* - **Ctrl-C and SIGTERM exit in order.** The signal handler called `RequestExit()` (which logs and runs a callback) and then `std::exit`, running the static destructors under live threads. It now makes the one call a handler may, `UltraCanvasApplicationBase::RequestExitFromSignal()`, and the main loop turns it into the same shutdown as a closed window. #### 2026-09-29 *1.53* - **A Prolog `.pl` file is coloured as Prolog, a Perl one as Perl.** Both languages use `.pl`, and which highlighting a file got was left to chance. Texter now reads the first lines, as it already does for `.cls` and `.m`. A `#` line, `use`, `my` or POD means Perl; a `%` comment or a `:-` rule means Prolog. A file that gives no clue opens as Perl. #### 2026-09-28 *1.52* - **The version is in the window title** — `UltraTexter 1.52` — so a screenshot or a bug report says which build it came from. The number is this changelog's first line, as everywhere else (`cmake/UltraCanvasVersion.cmake`). With a file open it reads `UltraTexter x.y.z - `. #### 2026-09-27 *1.51* - **The program file is `Texter` (`Texter.exe`, `Texter.app`), no longer `UltraCanvasTexter`.** Update shortcuts and file associations that name the old file. The window title and the name in the splash are still UltraTexter. - **The splash opens in the middle of the editor window.** It used to be centred on the monitor, so it sat off to one side whenever the window was not in the middle of the screen. Both are framework changes, see `Docs/UltraCanvas/changelog.d/splash-centred-on-window.md`. #### 2026-09-25 *1.50* - **A LaTeX `.cls` is no longer coloured as VBA, an Objective-C `.m` no longer as MATLAB.** With R, Scala, MATLAB and VBA switched on in the highlighter, `.cls` and `.m` each belong to two languages. Texter now reads the first lines of such a file to tell them apart: `\ProvidesClass` or a `%` comment is LaTeX, `VERSION 1.0 CLASS` or `Attribute VB_` is VBA, `#import` or `@interface` is Objective-C, a `%` comment or `function` is MATLAB. A LaTeX or Objective-C file opens as Plain Text, since the highlighter has no rules for those two. #### 2026-09-25 *1.49* - **The markdown side toolbar is 40 px wide again, with its separators centred.** It had grown to half the window: the framework's toolbar builder kept an 800 px minimum width on every vertical toolbar (fixed in the framework, see `Docs/UltraCanvas/changelog.d/toolbar-builder-thickness.md`). Showing the toolbar also switched its layout from a flex column to block layout, which put the separators at the left edge while the buttons stayed centred. It stays a flex column now. #### 2026-09-21 *1.48* - **The 1.47 entry below said neither of the two things it meant.** Two branches wrote a 1.47 entry at the same time - the table editing work and the version-number change - and git merged their bullet lists without a conflict, splicing two sentences into each other mid-word ("is greyed's first line is now the", "This changelogds it"). Both bullets are restored from their own commits; no behaviour changed. This is the shared-version collision `scripts/check_changelog.py` refuses at line 1, happening one line further down where nothing checks it. #### 2026-09-20 *1.47* - **Insert Table works in a word-processing document.** The toolbar button was greyed out there because there was nothing behind it; it now inserts a real 2x2 table with a header row and puts the cursor in the first cell, the same thing it means in a Markdown tab. - **A Table submenu on the right-click menu**, offered only when the cursor is in one: insert a row above or below, a column left or right, delete the row or column the cursor is in (named, so "Delete Row 2 of 5" says which), merge with the cell to the right or below, and split a merged cell back up. Merging keeps the text from both cells. - Anything that cannot be done right now is greyed rather than hidden: Split Cell where nothing is merged, Merge With Cell Right in the last column. - **One version number, one place.** This changelog's first line is now the only place Texter's version lives: the build reads it (`cmake/UltraCanvasVersion.cmake`) and passes it to the sources. The `"0.0-dev"` fallback in `UltraCanvasTextEditor.cpp` is gone; a build without the definition now fails at compile time instead of reporting 0.0-dev. `--version` printed a literal `2.0.0` of its own (`main.cpp`); it prints this number now. #### 2026-09-17 *1.46* - **Pictures inside a line of text stay there.** A logo in the middle of a sentence, an icon in a heading or a signature beside a sign-off used to be pulled out of its line and dropped below it as a paragraph of its own, which re-flowed everything around it. Such a picture now stays where the author put it, on opening, on screen and on saving. - A picture on a line of its own is still a standalone image, as before. #### 2026-09-16 *1.45* - **Tables with merged cells open, display and save correctly.** A cell spanning several columns is drawn that wide and the cells beside it sit past it, and a cell spanning rows reaches down over them — previously every cell after a merge was drawn in the wrong place. - **Vertically merged cells are no longer lost when you save.** Opening a `.odt` or `.docx` whose cells were merged downwards and saving it quietly un-merged them; the merge now survives the round trip in both formats. #### 2026-09-16 *1.44* - **Table cells can be edited in a word-processing document.** Click into a cell and type; **Tab** and **Shift+Tab** move between cells. Selecting, bold and the rest of the formatting all work inside a cell, and **Find and Replace now search table content**, which they skipped before. - Enter inside a cell adds a line to that cell rather than breaking the table in two, and Backspace at the start of a cell steps back to the previous one instead of merging cells. - Adding and removing rows and columns, merging cells, and selecting across several cells at once are not available yet — which is also why **Insert Table** stays greyed out in these documents. #### 2026-09-15 *1.43* - **Find, Replace and spell checking work in word-processing documents.** Both were unavailable when `.odt`/`.docx`/`.doc` files moved into the WYSIWYG editor in 1.42; this is the other half of that change. - Ctrl+F and Ctrl+H drive the document itself. Case-sensitive and whole-word both apply, the match counter reads "3 of 12", and **Replace All takes one Ctrl+Z to undo**, not one per match. Replaced text keeps the formatting of what it replaced, so replacing a word inside a bold heading leaves it bold. - Misspelled words get the same red squiggle they do in a text document, and right-clicking one offers the suggestions, **Add to Dictionary** and **Ignore** — inside the editor's own context menu, which now also carries Undo, Redo, Cut, Copy, Paste and Select All in these tabs. - **Go to line** is still not offered for these documents: a word-processing document is made of paragraphs, not lines, and the status bar reports the block the caret is in. - Find does not reach inside table cells yet, for the same reason table cells are not editable in place yet. #### 2026-09-15 *1.42* - **Word-processing documents open as themselves.** A `.odt`, `.docx` or `.doc` file now opens in the WYSIWYG editor (`UltraCanvasRichTextEdit`) instead of being converted to Markdown first. Fonts, sizes, colours, alignment and embedded images are what you see and what you edit, and saving writes the same document back out — so a 14 pt Georgia run in red survives a round trip instead of being flattened to whatever Markdown could spell. Bold is a state of the selection, not two asterisks in the text. - The formatting toolbar works in these tabs too: the same buttons apply the format to the document rather than inserting markup, and they light up from the caret's real formatting. **Checklist** and **Insert Table** are greyed out there, because a word-processing document has no checkbox list item and tables are not yet edited in place. - **Insert Hyperlink** asks for the address, and **Image** picks a file and embeds it in the document, so the picture is still there after a save. - Undo, Redo, Cut, Copy, Paste and Select All (menu and keyboard) act on the document. Copy and paste keep their formatting within UltraTexter. - **Find**, **Replace** and **Go to line** are not available in a word-processing tab yet, and neither is spell checking — the status bar shows the block the caret is in instead of a line and column. - **Save As** from a word-processing tab to `.md`, `.html` or `.txt` converts on the way out; saving to the legacy `.doc` format is still refused with a note to use `.docx`. #### 2026-08-28 *1.41* - **Spell checking.** *Edit → Spelling → Check Spelling* turns it on; misspelled words get a red squiggle as you type. *Dictionary* lists every language installed on the machine, and *Recheck Document* re-runs the check after you have taught it new words. Both the on/off state and the chosen dictionary are remembered between sessions. Nothing is loaded until you first switch it on, so start-up is unchanged if you never use it. - **A context menu in the editor.** Right-clicking the text now opens Undo, Redo, Cut, Copy, Paste and Select All — greyed out when they would do nothing — with the Spelling submenu at the bottom. Right-clicking a misspelled word puts the suggestions, **Add to Dictionary** and **Ignore** at the top of that same menu. The caret follows the right-click unless you clicked inside a selection, so Paste lands where you clicked and Cut/Copy still act on what is highlighted. - Markdown documents are checked as prose, not as markup: fenced and indented code blocks, inline `code`, link and image targets, autolinks, inline HTML, math and YAML front matter are all left alone, while the words around them — link text and image alt text included — are still checked. - Spell checking is skipped for a file opened in Hex/Binary view, and follows the language you pick in the status bar. - Requires a dictionary to be installed on the system (hunspell/myspell data, or whatever enchant finds). If none is present, switching the feature on says so instead of silently doing nothing. #### 2026-07-29 *1.40* - Fixed **Recent Files** losing entries — most visibly the file a document was loaded from before a **Save As**. `recent_files.txt` is shared by every window and every UltraTexter process, but each window rewrote the whole file from the snapshot it read at start-up, discarding everything the others had added since. Add/remove/clear now merge with the file on disk, and the menus re-read it when they open. - Recent file entries are stored as normalized absolute paths, so the same file opened via a relative command-line argument, a symlink or a `..` resource path is one entry instead of several — and no longer silently drops out of the list when the working directory changes. - Recent Files entries that share a file name (what "Save As" into another folder produces) now show their folder next to the name instead of appearing twice as the same item. - Added `Tests/RecentFilesTest.cpp` covering the Save As / multi-window scenarios. #### 2026-06-22 *1.39* - Fix Texter Search. No advance on each typed character #### 2026-06-18 *1.38* - Implemented show inline images in Markdown mode #### 2026-06-17 *1.37* - Merge "PDF support", implemented PDF support in Texter #### 2026-06-15 *1.36* - Merge changes from "Texter inactive icon rendering" #### 2026-06-07 *1.35* - Fix UltraCanvasTextEditorInfoFileStatistics layout (migrate from old layout) - Fixed crash-recovery naming so recovered tabs derive their names from actual content instead of showing stale Recovered1 … RecoveredX. #### 2026-06-03 *1.34* - Make Texter compliant with CSS layout support. #### 2026-05-18 *1.33* - Added an **"Open recent folder"** submenu placed directly under **File → Open...** #### 2026-05-13 *1.32* - Fix focus problem with Texter (new tab/close active tab) - Fix ordered list content offset in MD-mode in TextArea #### 2026-05-12 *1.31* - Implemented OS Recent files support (add opened files to OS Recent files list) #### 2026-05-09 *1.30* - Attempt to fix menu crash on MacOS #### 2026-05-06 *1.29* - Show tooltips with full pathname for Recent files menu items - Set maxWidth=500 for Recent files menu #### 2026-05-05 *1.28* - Fix invalidate all line layouts in TextArea on window size change #### 2026-05-04 *1.0.27* - Another attempt to fix hang with "recover confirmation" dialog - Update UltraCanvas to support MacOS HiDPI #### 2026-05-01 *1.0.26* - Fix hang when Splash and "recover confirmation" dialog shown in same time #### 2026-04-30 *1.0.25* - Fix cursor position in Markdown mode #### 2026-04-28 *1.0.24* - Fix Markdown toolbar (was not received events) - Major rework in the UltraCanvas (implemented optimized rendering) - Fix scroll down beyond the content - Fix font zoom change #### 2026-04-24 *1.0.23* - New: XML syntax highlighting with xml/xsd/xsl/xslt/xhtml extension support. - New: SVG syntax highlighting (inherits XML) with full SVG element and attribute vocabulary. - New: POM (Maven) syntax highlighting (inherits XML) with Maven element vocabulary. - New: RSS/Atom feed syntax highlighting (inherits XML) with feed element vocabulary. - New: KML syntax highlighting (inherits XML) with Google Earth geographic vocabulary. - New: JSON syntax highlighting with JSONC/GeoJSON/WebManifest variants. - New: YAML syntax highlighting with full YAML 1.1/1.2 boolean-spelling constants. - New: Texter "Data / Config" file filter covering JSON/XML/YAML/TOML/INI/POM/RSS/Atom/KML. - New: Texter "Vector Graphics (Text)" file filter for .svg/.svgz. - New: Texter New-Document dialog templates for SVG, POM, RSS, Atom, KML. - Well-known filenames (pom.xml, manifest.json, feed.xml, atom.xml, rss.xml, site.webmanifest) now auto-select their dialect highlighter before falling back to plain extension lookup. #### 2026-04-24 *1.0.22* - Moved Markdown toolbar under the tabs bar so tabs bar deos not moved when Markdown toolbar switched on/off - Implemented local 'Tab' key handling in the search/replace component to switch between 'search' and 'replace' inputs - Fixed search/replace bug when replaced string has content of "search" string - Fix search bar text colors/font size and other minor changes #### 2026-04-24 *1.0.21* - Fix tooltips rendering and file paths - Fix Markdown cursor position on mouse click #### 2026-04-23 *1.0.20* - Some color fixes for Dark mode #### 2026-04-17 *1.0.19* - Fix restore opened tab after load - Tabbed container active tab is not updated currently after load new file #### 2026-04-17 *1.0.18* - Many updates in UltraCanvasTextarea - Disable focus on TextArea in Markdown mode on file load and on tab switch if cursor at 0,0 position - Do RestoreSessionAndRecoverBackups immediately without waiting splash screen to close. - Fixed save all files on exit. #### 2026-04-17 1.0.17 - Change design of Recent files menu. Increase max recent files to 30 - Migrate Texter's Recent Files submenu to the new API. The submenu now regenerates itself on every open from the recentFiles list. - Fix Texter zoom shortcuts #### 2026-04-16 1.0.16 - Full rework of display and rendering the text. Use Pango layout to format text. Allow to use variable height lines #### 2026-04-06 1.0.15 - Fix markdown word-wrap rendering for blockquotes and code blocks #### 2026-04-05 1.0.14 - restore all tabs on relaunch, fix duplicate "Recovered" titles - Cursor line highlighting - Fix splash screen appearing on wrong monitor in multi-monitor setups #### 2026-03-28 *1.0.13* New Features - Inline Search/Replace bar (VS Code-style, UltraCanvasSearchBar) replacing the modal find dialog - Async match counting with background thread and cancel support - Search history and replace history persisted to config file - Match count display ("3 / 12") with live update on text change - Case-sensitive and whole-word toggle in search bar settings popup - "First match" jump button added to search bar Improvements - onHistoryChanged callback persists search/replace history on every change - Hex mode cursor byte offset used as search anchor in hex documents #### 2026-03-25 *1.0.12* New Features - Drag-and-drop file open: HandleDragEnter, HandleDragOver, HandleDragLeave, HandleFileDrop - Drop overlay rendered while external drag is hovering - Recent files list with persistent storage and submenu rebuild - Tab context menu - EOL type dropdown in status bar (LF / CRLF / CR) - Encoding dropdown in status bar with full re-encoding on save (BOM preserved) - Language / syntax dropdown in status bar - Zoom dropdown in status bar with configurable zoom percent steps - TextEditorConfigFile — INI-based config with XDG, %APPDATA%, and macOS paths - Session restore on startup (reopens previously open files + active tab index) Improvements - Encoding detection: BOM check → UTF-8 validation → heuristics (DetectEncoding) - Binary file auto-detection → opens directly in Hex mode - Raw bytes cached per document (up to 10 MB) for lossless re-encoding on save - Windows .rc resource script with version info embedded in EXE (1.0.12) #### 2026-03-17 *1.0.11* New Features - Hex / Binary editor mode (TextAreaEditingMode::Hex) with address panel, hex panel, ASCII panel - Hex undo/redo stack (separate from text undo stack) - Hex cursor navigation (nibble-level, row/column, page up/down, panel toggle) - Hex search (byte-level find/find-next) - Hex selection with mouse - MarkdownHitRect::isAnchorReturn — ↩ backlink icon on {#id} headings scrolls to jump source Improvements - SetBounds() override triggers layout recalculation on resize #### 2026-03-11 *1.0.10* New Features - AutosaveManager — periodic backup every 60 seconds for modified documents - Crash recovery dialog on startup: offers to restore autosaved files - Session + backup restore merged into RestoreSessionAndRecoverBackups() - Legacy autosave path migration (/tmp/UltraTexter/Autosave/) - AutosaveDocument() per-tab with stable backup path derived from file path + tab index #### 2026-03-02 *1.0.09* New Features - Backlink icons (↩) on {#id} headings — click returns to the line that jumped here - Anchor backlink map (markdownAnchorBacklinks) built during prescan - Abbreviation support (*[abbr]: expansion) — hover tooltip, word-boundary aware - Footnote support ([^label]: content) — multi-line continuations, inline rendering - Definition list support (term / : definition pairs, lazy continuation merging) - Emoji shortcode rendering (:fire:, :check:, :computer: etc.) - Table word-wrap: cell text wraps inside columns with markdown-aware font measurement - Code span font switching inside table cells for correct width measurement - sAnchorReturn hit rect type for ↩ backlink icons Improvements - H1–H6 font size clamped to line height with per-level ceiling multipliers (prevents overflow) - Header text vertically centred within fixed row height - Blockquote continuation segments rendered with quote indent - List item continuation segments rendered with list indent - Abbreviation definition lines and footnote definition lines hidden from rendering (except on cursor line) - Definition hidden/continuation lines suppressed from rendering - mdScrollBaseOffset computed from markdownLineYOffsets[firstVisibleLine] for correct table row positioning - Tokenizer cache: re-uses token vector across display lines from the same logical line #### 2026-02-26 *1.0.08* New Features - Initial standalone Markdown plugin component (UltraCanvas::MarkdownElementType enum) - Element types: Text, Header, Bold, Italic, Code, CodeBlock, Link, Image, and more #### 2026-02-21 *1.0.07* New Features - Self-contained inline search/replace bar (embedded panel, not a dialog) - Find mode (single row) and Replace mode (double row) - Settings popup menu (case sensitive, whole word checkboxes) - Search history popup and replace history popup - onFindNext, onFindPrevious, onReplace, onReplaceAll, onSearchTextChanged, onHistoryChanged callbacks - UpdateMatchCount(current, total) display label #### 2026-02-14 *1.0.06* New Features - DetectEncoding() — BOM + UTF-8 validation + heuristics - DetectBOM() — UTF-8 BOM, UTF-16LE/BE BOM detection - ConvertToUtf8() / ConvertFromUtf8() via POSIX iconv - GetSupportedEncodings() — full encoding list for dropdown - MAX_RAW_BYTES_CACHE = 10 MB per document